Deo-Gran

(Deodorant Granules)

Specially formulated with a proprietary odor counteractant concentrate. DEO Gran neutralizes obnoxious odor. One scoop of DEO Gran counteracts odor in dumpsters compactors, ash trays, waste baskets, etc. In addition to odor control, DEO Gran contains natural ingredients which have been proven to deter insects such as flies, bees mosquitoes, etc. DEO Gran is non-toxic, making it user and environmentally friendly.

ECCO-CRETE

Ecco-Crete is a permanent solution for cracked concrete, broken control joints as spalled concrete surfaces. The rapid set and ultra-low viscosity of the product allows surface to be put back into drive-over traffic within minutes. Can be applied at temperatures below freezing. Mixes with static water. Finished repair can be treated like concrete (cutting/drilling/coating/securing anchor bolts). Down time is minutes compared to competition. Permanent solutions for your repairs.

RUST CONVERTER

Stops Rust and Converts It to an Inert Protective Coating

Rust Converter is a liquid surface conditioner and primer that converts existing rust into an inert protective coating that seals out moisture and corrosion to prevent future development. Unlike other products, it is not a simple cleaner or cover-up. The special formula attacks rust at the chemical level, for fast, long-lasting results. Treated surfaces turn matte black and can be painted with an oil-based pain for even longer protection against new rust.

PROTECTS AGAINST

  • Effects of weather
  • Rain
  • Sun
  • Salt spray

FEATURES AND BENEFITS

  • Converts rust into a durable, long-lasting, protective coating.
  • Prepares metal surfaces to readily accept final coats of oil-based paint.
  • No sandblasting, grinding or etching required.

PROPERTIES

  • Appearance: Opaque beige liquid
  • Fragrance: Bland
  • Ready-to-Use: Yes
  • pH: 1.5 - 2.5
  • Protect From: Freezing temperatures or temperature above 100 degrees F
  • Shelf Life: 9 months for unopened product.

DIRECTIONS:
Complete directions on product label
Apply 2 coats, allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying an oil-based paint.

One gallon will cover 500 square feet of smoother non-porous surface. Irregular, porous surfaces will require a heavier application rate.

Tannic acid reacts with iron oxide (rust) and chemically converts to iron tannate, a dark-colored stable material. The overall chemical reaction converts rust to a stable, black, protective polymeric coating.

Do not paint with water-based paints.

SOYSLIDE ASPHALT RELEASE AGENT

Soy based product that does not allow hot asphalt to adhere to surfaces Asphalt will slide right off dump beds, rollers, rakes, spreaders, shovels and other surfaces. 100 percent safe ingredients. No hazardous diesel fuels or harmful fumes. Mix one quart into five gallons of water. Very cost effective.

  • Protects surfaces and saves time and money during clean up.
  • Extends the working life of expensive tools and equipment.
  • 100% natural and biodegradable formula will not harm equipment or degrade quality of asphalt or damage the environment.

GLIDE-OFF

Asphalt Release Coating

GLIDE-OFF is a highly concentrated anti-adhesion and release coatings for use on asphalt handling vehicles and equipment. When used properly it will prevent asphalt from sticking to coated surfaces and help maintain equipment appearance. GLIDE-OFF is specially formulated to work well with polymer modified mixes. It is approve by or meets the product specification of most states.

GLIDE-OFF is biodegradable and when used at recommended dilutions will not harm aluminum or steel truck beds.

Directions for Use:
Use GLIDE-OFF at a dilution rate of up to 30 parts water to one part product (30:1).
For difficult mixes use at a dilution rate of 20 parts water to one part product (20:1).

ULTRA 1000 FLOOR FINISH

Gives floors a tough, brilliant shine

SELF SEALING

Micron-size particles penetrate deep to fill the smallest pores giving an armor tough cohesive bond to the floor's surface.

WITHSTANDS ALL TYPES OF CONDITIONS

Resists stains. Impervious to grease and oil. Resists scuffing and heel marks.

PROFESSIONAL RESULTS EVERY TIME

This unique combination of select polymers, acrylics and self-leveling agents gives a uniform, crystal clear gloss with little effort.

DESCRIPTION

An industrial grade long-lasting floor finish. This floor finish is a high solids metal cross-linked, self-sealing acrylic polymer finish that provides a deep durable glass that will not yellow, discolor or powder, even with high speed burnishing. This floor finish can be used on all types of floors and is extremely resistant to scuffing detergent cleaning and staining.

APPLICATION

For use on most composition and hard surface floors.