For product information or to place an order call toll free:
FEATURES AND BENEFITS
• Eliminates 100% of disposal costs.
• Replaces granular absorbents, socks, pads and caustic degreasers.
• Easily applied with mops, auto floor scrubbers and degreasing equipment.
• Excellent rinse ability, dries quickly and removes all oily, slick film leaving a non-slip surface.
• NSF-approved A-1, A-4 class; biodegradable with a pH of 7.
• Safe to use on any water-safe surface, including metal, concrete, plastic and rubber.
• Disposable in waste sewer drains whether or not facilities are private or public municipal pre-treatment plants.
• Listed on the EPA’s National Contingency Plan (“NCP”) as a bioremediation agent.
• Non-toxic, non-pathogenic and is completely harmless to human, plant, animal and marine life.
• Reduces discharge figures and is compatible with skimming, evaporators and polymers systems.
Bioremediation is the application of biological microbes for the clean-up of hazardous oil spills resulting in a safe, efficient and cost-effective solution. Bioremediation uses microbes, enzymes, oxygen and other nutrients to chemically transform oil into carbon dioxide and water. Enviro 2020 increases the surface area of the oil while the enzymes break down the contaminants into smaller molecules. The enzymes then attract the microbes and consume the oil leaving only water and carbon dioxide as by-products. Once the reaction is complete, the enzymes break free to attach to another hydrocarbon source in order to repeat the same reaction.
Enviro 2020 has a pH of 7 and does not have any odor or contain any corrosives or butyls. It prevents slip-and-fall accidents, which are 30% of all workplace accidents, by removing the oily film and leaving surfaces dry and oil-free. Enviro 2020 significantly reduces the ability of flammable hydrocarbons to ignite, eliminating the VOCs and LELs which are inert on contact.
USES & APPLICATIONS
Mopping: Fill the container with properly-diluted product. Unlike degreasers, it digests oil and grease. As a result, there will not be an oily film in the water of the mop bucket. Degreasers only emulsify the oil and grease and “re-grease” the floors leaving a slick, oily film on the surface. For best results, with oily floors or visible oil, allow the solution to remain on the surface for about 30 seconds before mopping. Liberally apply to floor with a wet mop, dip mop again into bucket and agitate solution into surface. If the grease and oil is thick, use a deck brush to scrub the solution into the surface before mopping. Enviro 2020 will remove the oily film and leave the surface dry and clean preventing slip-and-fall accidents.
Auto Floor Scrubber: Fill scrubber with properly-diluted product. Start with a 1:25 dilution rate and adjust after testing. For best results, employ the double-scrub method. For the first auto floor scrubber pass, do not lower the squeegee. Spray solution while scrubbing. For the second pass, spray solution, scrub and lower squeegee for soiled water removal. Enviro 2020 will clean the auto floor scrubber by removing the oil and grease build-up in the tanks, brushes and hoses caused by emulsifying degreasers. It leaves surfaces dry and oil-free without any residue and prevents slip-and-fall accidents.
Degreasing: Fill container with properly-diluted product. The dilution rate may be determined if the operator will be using rags to clean (stronger), scrub brush (medium) or rinsing with a power washer (weaker). When cleaning heavy oil/grease deposits, allow product to soak for 1-2 minutes before removing. Heavy deposits of synthetic grease may require additional dwell time. Enviro 2020 will remove the oily film leaving the surface dry and clean, unlike degreasers which only re-deposit or “re-grease” the surface with oil. It is safe for any water-safe surface including metals, rubber, plastic and painted surfaces.
Oil/Water Separators (“OWS”): Enviro 2020 improves OWS operations and reduces costs and compliance issues. Conventional degreasers emulsify oil in waste water and make OWS’s ineffective allowing oil to bypass the collection system straight to the sewer. Additionally, it digests sludge and petroleum content suspended or dissolved in the OWS waste water. Facilities using Enviro 2020 have eliminated waste water violations and have reported reducing their sludge petroleum content by more than 80 percent.
Soil Remediation: Enviro 2020 can be applied to small, topical spills of hydrocarbons on soil and gravel areas. It can be applied by spraying directly onto the surface of the soil or gravel. Tilling the soil and re-spraying provides an even distribution of microbes. Repeated tilling accelerates the biological degradation of the soil contaminants.
Fuel Remediation: Add a small amount of Enviro 2020 to any fuel residue in tanks Or vats. Mix Enviro 2020 10:1 ratio with water for fuel spills.
Enviro 2020 is highly concentrated and works best when properly-diluted. We offer a variety of proportioner systems for drums and totes. The drum proportioner automatically mixes water with Enviro 2020 precisely to the prescribed ratio and is capable of being wall-mounted. The tote-dispensing system is designed for quick dispensing in high-volume environments. The diluted solution can be dispensed into any container (auto scrubber, mop bucket, buddy jars, etc.).
HYDROCARBON DEGRADE CHART
|Crude Oil||Gasoline||Diesel Fuel|
|Kerosene||Fuel Oils||Jet Fuel|
|Animal Oils||Motor Oil||Anti-Freeze|
|Vegetable Oils||Hydraulic||Cutting Fluids|
|APPLICATIONS & RATIOS||HEAVY DUTY||MEDIUM DUTY||LIGHT DUTY|