Cooling Water Treatment 2120

Custom Blending AvailableFor product information or to place an order call toll free:

800-262-0458

Go to information request form

Unique blend of scale & corrosion inhibitors for open recirculating systems

Cooling Water TreatmentCooling Water Treatment 2120 is used in cooling water systems where make-up water has both high hardness and alkalinity. Calcium hardness levels of 1 000-5 oooppm with a pH of 9.0-10.0 can be maintained in the cooling water system with no loss in heat transfer efficiencies. Cooling Water Treatment 2120 contains no chromate or other heavy metals.

Corrosion studies on systems using Cooling Water Treatment 2120 have shown corrosion rates of less than .03 mils for copper and less than 3.0 for mild steel.

Cooling Water Treatment 2120 is chlorine compatible.

PRODUCT DESCRIPTION
Physical State – Liquid
Color – Light yellow
Density – 8.90 lbs./gallon
pH 2.0

DOSAGE:

Start Up: Add two quarts of Cooling Water Treatment 2120 per 1,000 gallons of water in the system.

Recirculating: Add one pint of Cooling Water Treatment 2120 per 1,000 gallons of makeup water. Adjust feed rate to maintain 400-600 ppm of Cooling Water Treatment 2120 in the system.

On-Line Cleaning: Add 1 to 1-1/2 quarts of Cooling Water Treatment 2120 per 1,000 gallons make-up water. Adjust feed rate to maintain 800-1200 ppm of Cooling Water Treatment 2120 tn the system. In all cases, maintain a minimum of 50 ppm Cooling Water Treatment 2120 in the system to insure corrosion protection.

TREATMENT FEEDING

Cooling Water Treatment 2120 can be shot fed, however superior results can be achieved when added via a positive displacement chemical feed pump. For optimum results, the pump should be controlled by a contact water meter/impulse timer system.

HANDLING

Cooling Water Treatment 2120 is an acidic material. Do not take internally. Avoid contact with skin and eyes. Should contact occur, flush jmmediately with water. jf any discomfort persists, seek medical attention. Read relevant Material Safety Data Sheet before handling this product.

AUTHORIZATION

Cooling Water Treatment 2120 is authorized by the USDA for use in federally inspected plants.

PACKAGING

Cooling Water Treatment 2120 is packaged in 55-,30-, and 15-gallon non-returnable drums and 5-gallon pails.